the best means for roof covering insulation.

Roofing system insulation approaches are split into three groups: inflexible board, non-rigid, as well as splashed polyurethane foam. Stiff boards are generally made use of in low-slope settings up, as well as some usual insulation products are polyisocyanurate, extruded polystyrene and mineral wool. Non-rigid insulation is mostly utilized for attic rooms and also pre-engineered buildings.

Cover boards are thin layers of insulation, such as timber fiber board, perlite, thick polyisocyanurate and glass-mat gypsum. Cover boards are positioned over the key thermal insulation to boost its physical residential properties:

Boosted fire resistance
Compressive stamina
Protection from roof covering foot web traffic
Preventing blistering and shrinkage
Wind uplift resistance
Enhanced compatibility.

Cover boards are additionally used in reroofing to enhance the application surface. They cover joints between insulation boards, and also provide a splitting up layer in between the existing as well as brand-new roofing membranes.
Rigid Insulation Boards

Inflexible insulation boards, likewise called board-stock insulation, provide adequate compressive strength to sustain the roof membrane as well as its loads. Besides giving assistance for the roof membrane, inflexible insulation additionally provides an uniform surface for membrane application and enhanced hail storm resistance. Below is a checklist of the common types of rigid insulation boards available:

Perlite: An open-cell reduced R-value insulation made use of as a cover board, which supplies excellent fire resistance but loses compressive stamina when subjected to water. 1/2″ boards have a better percent of organic material compared to thicker boards. When hot asphalt is utilized it can trigger blistering, as well as because of this perlite is generally not recommended.

Polyisocyanurate: A high R-value plastic foam insulation made use of in low-slope roofings. It has a higher resistance to fire compared to polystyrene, yet this should be verified with suppliers if a thermal barrier is called for. Polyisocyanurate insulation always features facers, thin sheets on both faces, considering that they are necessary in the production process. When based on high traffic, foam insulation can press and also facers can flake. Polyisocyanurate will certainly take in wetness when exposed to a leakages. This creates the insulation to shed its R-value, making a replacement required, unlike polystyrene which can be recycled. Note that polyisocyanurate is less costly than extruded polystyrene.


Compound boards: Composite boards are constructed from 2 layers of various insulation types, which are laminated together in a factory. The major insulation is generally polyisocyanurate or EPS; and also the 2nd layer can be perlite, plywood, timber fiber board or gypsum board. Commonly, the second layer will certainly be the leading surface area of the board. Having a solid mechanical attachment in between both layers is essential, or otherwise the additional layer can fall off.

Polystyrene: There are two sorts of polystyrene insulation, broadened polystyrene (EPS) as well as extruded polystyrene (XPS), each with special buildings. Polystyrene is a sort of plastic foam, therefore it ought to be used with care in circumstances where warm roof materials are utilized.

Enhanced Polystyrene (EPS): EPS is in some cases referred to as bead-board or shaped broadened polystyrene, and also it is a low-density product with moderate R-value. EPS does not provide high water vapor resistance, and also will disintegrate when revealed to solvent-based adhesives and also warm asphalt. If any of these materials is utilized, a cover board needs to be set up over the insulation. Unlike other plastic foam insulations, EPS will not thermally age considering that its cells are loaded with air.
Extruded Polystyrene (XPS): Extruded polystyrene has a high R-value and great resistance against water vapor. Nevertheless, similar to EPS, it needs to not be exposed to warm asphalt, solvents or very heats. Compared with polyisocyanurate, XPS uses the opportunity of reuse since it does not take in water. XPS insulation additionally has a lower life process expense than polyisocyanurate insulation.

Blanket, Batt, and also Blown-In Insulation

This insulation is typically used for attic room spaces and also roof coverings of pre-engineered steel buildings. Batt insulation is factory-cut into basic sizes and also bundled without rolling, while blanket insulation comes in rolls. The most typical material for batt and also blanket insulation is fiberglass, which is additionally readily available as a blown-in product. Other materials consist of mineral woollen, which has higher compressive toughness than fiberglass; and cellulose from recycled newspaper, which is readily available for blown-in insulation as well as can be treated to resist fire and mold and mildew.

Sprayed Polyurethane Foam Insulation

Splashed polyurethane foam (SPF) insulation systems are self-adhering, two-component materials. They are straight related to roofing decks, and can serve as insulation and air barrier when applied to the bottom. SPF insulation is available in closed-cell or open-cell variations, with various levels of vapor leaks in the structure. It can be used on its own, or as a key roofing covering in mixes of safety finishings.

Now allows discuss a new technique hyperdesmo.

Great roofing waterproofing – Urban warm islands as well as sustainable cities

Cool Roofing System – HYPERDESMO

Trendy Roof – HYPERDESMOCool Roofing – HYPERDESMOCool Roofing – HYPERDESMO

The sensation of urban warmth islands is found in cities and describes the temperature level distinction between metropolitan and also rural areas which sometimes reaches up to 4 ° C. Studies mention that earth’s typical temperature level will raise in between 2 and 4 levels Celsius within this century. One of the main factors that add to this sensation, is the concrete infrastructure and high density-materials located in urban atmospheres as well as which take in higher quantities of warmth compared to rural areas. A crucial element is the low solar reflectance of urban settings which brings about the absorption of thermal power and also is released later as heat in the environment.

Furthermore, the use of cars, air-condition systems and also other result in an additional increase in the thermal power put in as well as thus resulting in temperature increases. In fact, making use of air-conditioning units is among the vehicle drivers of the around the world growing energy need and enhances power consumption at a massive range in the household as well as business markets.

Great roofings

Roofs are one of the most revealed structures in buildings absorbing a lot of heat. In this respect, cool roofings are taken into consideration one of one of the most sustainable and affordable solutions to reduce warm island effect in cities and create at the same time the right thermal convenience in structures.

Great roof coverings is the term used for roofings that show over 65% of the sun’s rays compared to standard roofings which ward off less than 15%. Cool roofings are able to push back heat due to the fact that the products used to layer them, provide high solar reflectance.

Researches have actually shown that the typical energy-saving result of great roofings varies from 15% to 35.7% in different climatic areas and also the average roof covering surface temperature level decrease is feasible from 1.4 ˚C to up to 4.7 ˚C.

The development of an awesome roofing system improves the power efficiency of structures as well as sustains the advancement in metropolitan sustainability for cooler and much healthier settings with better air quality, mitigating the city heat island phenomenon.

So we have taken a look at the most effective methods for roofing system insulation (μονωσεισ ταρατσων) as well as likewise we have talked about trendy roof coverings as well as hyperdesmo roof insulation (μονώσεισ ταρατσών hyperdesmo ).